For MTI to conduct analysis, we ask our clients to submit a sample of an ash deposit.
Instructions for submitting a sample are below:
1. Using the table below, determine the amount of sample you will need.
2. Label your samples with any necessary collection information (i.e. date and location).
3. Send your samples in clean, unbreakable containers along with a letter explaining analysis requested.
|Analysis||Quantity of Sample Required¹|
|Bulk Ash Composition||50 grams|
|CCSEM||<1 – 10 grams of coal or ash|
|Chemical Fractionation||Approximately 225 grams of coal² (1/2 lb.)|
|Proximate Analysis||115 – 225 grams of coal (4-8 oz.)|
|SEMPC||5 – 10 grams of ash or deposit|
|Ultimate Analysis||115 – 225 grams of coal (4-8 oz.)|
|Morphological Analysis||0.01 – 1000 grams, filter media|
¹ We can often make do with smaller quantities, but these amounts are recommended.
² Preparation of coal for CCSEM analysis requires that the coal be ground to the grain size of the coal as it is typically fired. Coal can be ground to specific requirements at the MTI coal lab.
Occasionally more sample is required for specialized analysis. Please contact Microbeam for more information: email@example.com
Please send samples to:
Microbeam Technologies Incorporated
4200 James Ray Drive, Ste. 193
Grand Forks, ND 58203